POROUS METAL BODY | Products

Our porous metals are
Contains numerous pores like a resin sponge
Porous metal, sintered metal material.

Porous metal materials include
Aluminum foam, which is produced by adding a foaming、
However, each pore in the material is independent of the other, making it unsuitable for

fluid-passing applications such as filters.
Our metal porous materials, on the other hand,
manufactured to trace the structure of foamed polyurethane foam (sponge).
Since each pore is a continuous bubble body that is.
The specific surface area is several hundred times greater than that of a simple plate block, making it suitable for use as a reaction layer or filter,
Suitable for use as reaction beds and filters.

[Manufacturing Process]
The slurry is prepared by mixing fine metal powder with a solvent,
The slurry is then coated onto a foamed polyurethane foam、
After drying, the slurry is fired (sintered).

The finished porous material essentially takes on the properties of the powder material used.
Because the organic material (polyurethane) used in the
No organic matter remains in the porous material.

【Microstructure of porous metals】
　 　

Our porous metals can be made in different diameters and
Please specify “Material”, “Mesh No.”, and “Dimensions”,
We will provide you with a quotation.

※ Pore size and porosity vary depending on the material.
Please check the detailed pore size and porosity individually.

【Representative Features】

【Pressure loss】